AASB federal item identification guide code
Jump to navigation
Jump to search
AASB is the Federation Item Identification Guide code for the “fastener length” specification.
Definition | the dimension, measured along a line parallel to the longitudinal axis, from the largest bearing surface of the fastener head to the extreme opposite end, or as specifically designated for other type fasteners. |
---|---|
Instructions | Enter the applicable Reply Codes from Table 1 below, followed by the numeric value. |
Note | The numeric value must be entered in millimetres. |
|
Examples[edit source]
- Stand-alone formats
- This
{{AASB-FIIG-code/designation | A60.0 }} renders as
60.0 mm (2.36 in) nominal
- This
{{AASB-FIIG-code/designation | B15 }} renders as
15 mm (0.59 in) min.
- This
{{AASB-FIIG-code/designation | C7.75 }} renders as
7.75 mm (0.305 in) max.
- In “Technical Characteristics” table formats
- This
{{specification-table row | AASB | A60.0 }} and;
- This
{{specification-table row | AASB | B15 }} and;
- This
{{specification-table row | AASB | C7.75 }} renders as:
Code Specification Designation AASB Fastener length 60.0 mm (2.36 in) nominal AASB Fastener length 15 mm (0.59 in) min. AASB Fastener length 7.75 mm (0.305 in) max.