ABTB federal item identification guide code

Jump to navigation Jump to search

ABTB is the Federation Item Identification Guide code for the “Mounting hole diameter” specification.

Definition The length of a straight line which passes through the center of a mounting hole, and terminates at the circumference.
Instructions Enter the applicable Reply Codes from Table 1 below, followed by the numeric value.
Note The numeric value must be entered in millimetres.
Table 1
Code Defintion
A Nominal
B Minimum
C Maximum

Examples[edit source]

 
Stand-alone formats
This →   {{ABTB-FIIG-code/designation | A5 }}   renders as →  mm (0.20 in) nominal
This →   {{ABTB-FIIG-code/designation | B15 }}   renders as →   15 mm (0.59 in) min.
This →   {{ABTB-FIIG-code/designation | C7.75 }}   renders as →   7.75 mm (0.305 in) max.
 
In “Technical Characteristics” table formats
This →   {{specification-table row | ABTB | A5 }}   and;
This →   {{specification-table row | ABTB | B15 }}   and;
This →   {{specification-table row | ABTB | C7.75 }}   renders as:
Code Specification Designation
ABTB Mounting hole diameter mm (0.20 in) nominal
ABTB Mounting hole diameter 15 mm (0.59 in) min.
ABTB Mounting hole diameter 7.75 mm (0.305 in) max.