ABHP federal item identification guide code

Jump to navigation Jump to search

ABHP is the Federation Item Identification Guide code for the “overall length” specification.

Definition The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Instructions Enter the applicable Reply Codes from Table 1 below, followed by the numeric value.
Note The numeric value must be entered in millimetres.
Table 1
Code Defintion
A Nominal
B Minimum
C Maximum

Examples[edit source]

 
Stand-alone formats
This →   {{ABHP-FIIG-code/designation | A5 }}   renders as →  mm (0.20 in) nominal
This →   {{ABHP-FIIG-code/designation | B15 }}   renders as →   15 mm (0.59 in) min.
This →   {{ABHP-FIIG-code/designation | C7.75 }}   renders as →   7.75 mm (0.305 in) max.
 
In “Technical Characteristics” table formats
This →   {{specification-table row | ABHP | A5 }}   and;
This →   {{specification-table row | ABHP | B15 }}   and;
This →   {{specification-table row | ABHP | C7.75 }}   renders as:
Code Specification Designation
ABHP Overall length mm (0.20 in) nominal
ABHP Overall length 15 mm (0.59 in) min.
ABHP Overall length 7.75 mm (0.305 in) max.